Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[HammerDave]

This is not the right place, but it's in a place that is likely to be noticed...

The bug tracker page has this at the top:
SYSTEM WARNING: session_start() [function.session-start]: open(/tmp/sess_jivba1t9mltkhrt8ngfo0b7ed6, O_RDWR) failed: Disk quota exceeded (122)

[Maldevious]

This is not the right place, but it's in a place that is likely to be noticed...

The bug tracker page has this at the top:
SYSTEM WARNING: session_start() [function.session-start]: open(/tmp/sess_jivba1t9mltkhrt8ngfo0b7ed6, O_RDWR) failed: Disk quota exceeded (122)

That will show up if you aren't logged in when you follow Footkerchief's link. Log in and you should go right through.

[Shiv]

Am I the only one who seems to have worse frame rates with this version? 

Additionally, it takes forever and half a day to create a new world, specifically in the 'offloading units' department. 

[mnjiman]

Am I the only one who seems to have worse frame rates with this version? 

Additionally, it takes forever and half a day to create a new world, specifically in the 'offloading units' department.

 I have it as well, and i have a Dual 2.4 Ghz, 3 gig ram too.

it is confusing.

[Josiwe]

Am I the only one who seems to have worse frame rates with this version? 

Additionally, it takes forever and half a day to create a new world, specifically in the 'offloading units' department.

After the show-stopper bugs get fixed Toady may be able to look into issues like that - assuming they aren't fixed as a side effect of other bug fixes - but the best way to ensure that it at least gets looked at is to search the bugtracker for the related bug and add your details, like your system specs and any other notes you think might be relevant.

[bungler]

OK, so this works great for me - it's not that much faster than using Baughn's DF accelerator hack, but it works great.

Thing is, I can't get to items in the Stocks window that have more than a few thousand entries. It skips straight past them as if I've hit up (or down) twice. ...

Where you able to resolve this?

[HammerDave]

This is not the right place, but it's in a place that is likely to be noticed...

The bug tracker page has this at the top:
SYSTEM WARNING: session_start() [function.session-start]: open(/tmp/sess_jivba1t9mltkhrt8ngfo0b7ed6, O_RDWR) failed: Disk quota exceeded (122)

That will show up if you aren't logged in when you follow Footkerchief's link. Log in and you should go right through.

That's not it, I'm logged in.  It's acting like the server doesn't have enough space to do something.

SYSTEM WARNING: session_start() [function.session-start]: open(/tmp/sess_99fe0802a6b22498b6f35152afba3eb6, O_RDWR) failed: Disk quota exceeded (122)

Logged in as: HammerDave (David - reporter)   2010-05-25 23:40 PDT   RSS

[koitsu]

PHP on the web server is set up to use server-side sessions (e.g. session/cookie data stored in files on the server, on the /tmp filesystem).  The filesystem /tmp is out of space.  The server administrator should fix the space issue and also tune php.ini properly to reap/expire old sessions more often.  There's also a good possibility that the PHP scripts on the system (e.g. this board) isn't properly calling session_destroy() when it should, meaning it ends up leaving files in /tmp.

[koitsu]

Am I the only one who seems to have worse frame rates with this version? 

Have you tried adjusting the "PRINT_MODE" parameter in data\init\init.txt to be something other than "STANDARD"?  The comments in the file preceding the PRINT_MODE declaration give some insight to possible values.  I tend to recommend 2D or 2DASYNC, but it greatly depends on what model of video card you have (nVidia vs. ATI vs. Intel usually).  This thread goes over the development and introduction of said feature (it's not your fault you weren't following it; and I'm not being sarcastic):

http://www.bay12forums.com/smf/index.php?topic=51957.0

Additionally, it takes forever and half a day to create a new world, specifically in the 'offloading units' department.

Creating a new world takes a long time for me too.  I'm really not too worried about this, but it does seem to be a concern for folks on laptop systems (CPU + GPU stress combination resulting in overheating).

[Rex_Nex]

I'd love to take a gander at the bugtracker. Captcha doesn't load though :/

[Narmio]

OK, so this works great for me - it's not that much faster than using Baughn's DF accelerator hack, but it works great.

Thing is, I can't get to items in the Stocks window that have more than a few thousand entries. It skips straight past them as if I've hit up (or down) twice. ...

Where you able to resolve this?

I was not, and I haven't seen it mentioned here or elsewhere for now.  Although I haven't tried messing around with the key_repeat delay in the init.  Sort of a minor bug, but I want to be able to see how much Bituminous Coal I've got left again!

Anyone else having this problem?  To reproduce, just create 4000+ of any type of item and then try to go to it in Stocks.  Easiest with stones in the course of any normal fort, although you could embark with thousands of something cheap and seven starving peasants just to create this effect!

[Baughn]

Mantis should be fine now. There was an infinity of spam email, in the mail server toady didn't know was running... pushed it over the file-count limit.

Um, yeah. It's dead now.

[Footkerchief]

Anyone else having this problem?  To reproduce, just create 4000+ of any type of item and then try to go to it in Stocks.  Easiest with stones in the course of any normal fort, although you could embark with thousands of something cheap and seven starving peasants just to create this effect!

It's a known bug.

Mantis should be fine now. There was an infinity of spam email, in the mail server toady didn't know was running... pushed it over the file-count limit.

Um, yeah. It's dead now.

Dang, that's random.  Thanks for getting that fixed.

[Kazang]

Am I the only one who seems to have worse frame rates with this version? 

Additionally, it takes forever and half a day to create a new world, specifically in the 'offloading units' department.

 I have it as well, and i have a Dual 2.4 Ghz, 3 gig ram too.

it is confusing.

This is easy to fix.

Remove the fps cap when generating worlds, then put it back on when you go to embark.  For some reason the fps cap is applied to back end calculations like offloading units in .04

I've reported this as a bug although he probably figured out why it was slowing down anyway.

[Shiv]

Speaking of FPS caps:  does anyone else have their FPS counter located in the center-right of their screen?  Mine is no longer in the left hand portion and it blocks the dates in the status screen.